How To Clean Cooked On Grease On Range Hood

How To Clean a Greasy Range Hood Filter

SaveComments

We independently select these products—if you buy from one of our links, we may earn a commission.

(Image credit: Cat Meschia)

When was the last time you peeked underneath your stove's hood and checked out the exhaust fan filters? If information technology'southward been awhile or y'all've, um, never done this, permit me warn yous: it's not going to be pretty. The purpose of a range hood filter is to collect grease, then if it's doing its job correctly, it's going to wait and feel, well, greasy.

Over time, the the filter may go and then blocked with grease and ickiness that information technology loses its effectiveness, which is why it's of import to make clean these filters periodically.

Thankfully, cleaning them isn't hard at all!

(Image credit: The Kitchn)

This tutorial shows how to clean the filter in your sink with simply boiling h2o, blistering soda, and a practiced de-greasing dish soap. (I prefer Dawn.) Some hood filters can actually exist washed in the dishwasher, merely depending on how long information technology'south been since you lot've cleaned yours, I wouldn't recommend that without at to the lowest degree cleaning them this style first. (You don't desire too much grease to end up in your dishwasher!)

And so, permit'south de-grease those filters at present, shall nosotros?

How To Clean a Greasy Range Hood Filter

What You Need

• Very hot or boiling water
• Degreasing dish soap (Dawn works very well)
• Blistering soda
• Non-annoying scrub brush
• Newspaper towels or dish cloth

Instructions

1. Remove the filters from the hood: Almost filters should hands slide or pop out of the underside of the hood. Mine had a metal loop I could grab to push the filter upward and slide it out.
2. Make full a sink or saucepan with boiling water: The hotter the h2o, the more effective. Depending on how hot yous can go the water from your tap, that might be adept plenty. For me, I boiled h2o in my electric tea kettle, and poured that into the sink.
3. Pour in baking soda and dish soap: Pour a good squirt of de-greasing dish soap and 1/4 cup baking soda into the hot h2o. Swish around with a castor (not your hand because it's besides hot!) until the water is nice and soapy.
4. Put greasy filters in water: Submerge your greasy exhaust fan filters into the water. Make certain they're completely covered.
5. Let them soak: Let the filters to soak for 10 minutes.
6. Scrub the filters: After soaking, take a not-abrasive scrub brush and scrub the filters. Add more dish soap to your castor if required while you scrub.
7. Rinse and dry: Rinse the filters thoroughly in hot water and dry out with a paper towel or clean fabric.
8. Replace the filters and echo every bit needed: Put the filters dorsum into the hood, and repeat every bit needed! Cleaning the filters once a month is a good maintenance strategy.

Cambria Assuming

Contributor

Cambria was an editor for both Apartment Therapy and The Kitchn for eight years, from 2008 through 2016.

Source: https://www.thekitchn.com/how-to-clean-a-greasy-range-hood-filter-cleaning-lessons-from-the-kitchn-203844

Posted by: laniermashe1935.blogspot.com

Share this post